QLR1660 User Manual
2-1. System Setup
▶Camera On/Off: Enable / Disable each camera. (16cameras)
▶System
▪Auto switching interval: Setup the interval time for the auto switching. All cameras will be displayed sequentially with this interval time.
▪Display character on screen: Displays the information associated with each camera on screen.
*OSD (On Screen Display) menu:
-Camera location: camera name set in Camera setup panel
-Record mode set: Continuous record(
), Motion record(
), Sensor record(
), Event record(
)
-Motion: Detect (
)
-Sensor: Detect (
)
-Audio set: Enable (
)
-Recording: in recording (R)
▪HDD Overwrite: Enable the HDD to overwrite when full.
-On: When the selected record drive is full (when free space is under 500MByte), the QLR1660 will begin overwriting the drive from the beginning.
Whenever free space is under 500MByte, the QLR1660 system creates the free space of 2.0Gbyte by erasing oldest data to save new recording data.
-Off: When the selected record drive is full (when free space is under 500MByte), the QLR1660 will stop recording.
[NOTE] If recording is stopped, all recording buttons on main window are off and ‘Suspend’ message is displayed on the event log viewer. Get the new space for recording
26
