Configuring Individual WAN Connections
Configuring dial-in PPP for AppleTalk
MAX 6000/3000 Network Configuration Guide 4-73
Configuring an AppleTalk PPP connection with a Connection profile
To use a Connection profile to configure an AppleTalk PPP connection:
1Open the Ethernet > Mod Config subprofile.
2Set the Appletalk parameter to Yes.
3Open the appropriate Connection profile.
4Set the Route Appletalk parameter to Yes.
5Open the AppleTalk Options subprofile.
90-103 apple
AppleTalk Options
Peer=Dialin
Zone Name=N/A
Net Start=N/A
Net End=N/A
6Set the Peer parameter to indicate whether the connection for this profile is a single-user
PPP connection or a router.
Peer=Dialin specifies that the profile is for a single-user PPP connection. All other
parameters in the AppleTalk Options menu are N/A. Peer=Router specifies that the pro file
is for a connection with a router (such as a Pipeline unit).
7If you selected Peer=Dialin, you have completed the configuration. Close the AppleTalk
Options menu and save your changes. If you selected Peer=Router, you need to configure
the other parameters in the AppleTalk Options menu.
8Exit the profile and, at the exit prompt, select the exit and accept option.
Configuring an AppleTalk PPP connection with a Names/Passwords profile
To use a Names/Passwords profile to configure an AppleTalk PPP connection:
1Open the Ethernet> Mod Config profile.
2Set the Appletalk parameter to Yes.
3In the Answer profile, open the PPP Options subprofile.
4Set the Route Appletalk parameter to Yes.
5Open the PPP Options profile’s Appletalk Options subprofile.
6Set the Peer parameter to indicate whether the connection for this profile is a single-user
PPP connection or a router.
Peer=Dialin specifies that the profile is for a single-user PPP connection. All other
parameters in the AppleTalk Options menu are N/A. Peer=Router specifies that the pro file
is for a connection with a router (such as a Pipeline unit).
7If you selected Peer=Dialin, you have completed the configuration. Close the AppleTalk
Options menu and save your changes. If you selected Peer=Router, you need to configure
the other parameters in the AppleTalk Options menu.
If you selected Peer=Router in step 7 of the preceding procedure:
1Configure the AppleTalk zone name for the MAX unit in the AppleTalk Options
subprofile of the Ethernet profile.