Adding paper, Toner and Staples
Note
❒When performing the auto color calibration from the copy function, press [Start] under Copier Function. When performing from the printer function, press [Start] under Printer Function.
❒The test pattern will not be read if it is set in the ADF.
❒When performing the auto color calibration from the printer function, se- lect test patterns from [600 ⋅ 600 dpi], [1800 ⋅ 600 dpi] and [2400 ⋅ 600 dpi] and then press [Start Printing].
❒The test pattern will be printed on an A4K, 81/2”⋅ 11”K size page (If A4K is not available then A3 L, B4 JISL will be used.). Make sure to check the paper set in the paper tray.
❒Set the test pattern in the following way:
6
GCCLCPIE
❒When the ADF is installed, make sure to set the test pattern on the expo- sure glass, and then 2 or 3 white sheets, same size as the test pattern, above the test pattern.
96