Loading paper

Loading Paper into the Large Capacity Tray (LCT)

The following procedure explains loading paper into the large capacity tray (LCT).

Important

LCT (optional) uses Letter- sized paper (8 1/2” ⋅ 11”K) exclusively. Only load 8 1/2” ⋅ 11”K paper. If you want to load A4K, contact your service representative.

Align the paper stacks and load them against the left and right walls, or a pa- per misfeed might occur.

Do not stack paper over the limit mark.

A Pull out the LCT, slowly until it stops.

6

AQD029S

B With the print side up, align all four sides of two paper stacks, and then load them next to each other in the tray. Each side has a limit of 1,000 sheets.

AQD030S

C Push the paper tray slowly in until it stops.

81