Remarks
Maintaining Your Machine
If the exposure glass, exposure glass cover, or ADF belt is dirty, copy clarity may be reduced. Clean these parts if they are dirty.
Important
❒Do not use chemical cleaners or organic solvents, such as thinner or benzene. If such substances get inside the machine or melt plastic parts, a failure might occur.
❒Do not clean parts other than those explicitly specified in this manual. Other parts should only be cleaned by your service representative.
❖How to maintain
Cleaning the machine: Wipe the machine with a soft, damp cloth, and then wipe it with a dry cloth to remove the water.
Cleaning the Exposure Glass
The following procedure explains how to clean the exposure glass and the scanning glass.
8
Clean 1 and 2.
122