∙Frequency range
PentaScanner+: 1.0 to 100 MHz
PentaScanner/PentaScanner Cable Admin: 1.0 to 100 MHz
∙Sweep mode: Swept 1- 100 MHz using 1 MHz step or fixed points (1.0, 2.0, 4.0,5,0, 8.0, 10, 16.0, 20, 25, 31.25, 62.5, and 100 MHz)
∙Dynamic Range: 0 - 50 dB
∙Measurement Accuracy:
PentaScanner+: Calculated per TIA
PentaScanner/PentaScanner Cable Admin: 1.5 dB
∙ Measurement resolution: 0.1 dB
Impedance |
| |
∙ | Range: | 40 to 200 ohms |
∙ | Accuracy: | ± 5 ohms |
∙ | Resolution: | 2 ohms |
Loop Resistance |
| |
∙ | Range: | 0 to 10000 ohms |
∙ | Accuracy: | ± 0.3 ohms @ 0 to 15 ohms |
±2% @ 15 to 109 ohms (PentaScanner+)
±2% @ 15 to 200 ohms (PentaScanner/PentaScanner Cable Admin
±5% @ 109 to 5000 ohms (PentaScanner+)
±5% @ 200 to 5000 ohms (PentaScanner/PentaScanner Cable Admin)
±10% @ 5000 to 10000 ohms
∙ | Resolution: | 0.1 ohms | 0 to 200 ohms |
|
| 1.0 ohms | 200 to 9.999K ohms |
Capacitance |
|
| |
∙ | Range: | 0 to 100,000 pF | |
∙ | Accuracy: | ± 20 pF | 0 to 200 pF |
|
| ± 10% | 200 to 100,000 pF |
∙ | Resolution: | 5 pF | 20 to 1000 pF |
|
| 50 pF | 1000 to 100,000 pF |
Impulse Noise
∙Detects the occurrence of narrow impulse type events exceeding an adjustable threshold of
± 0.262, 0.524, 1.0, 2.0 or 2.5 volts. Instantly displays up to 200 impulse noise events per second. Graphically logs and displays impulse events for up to 25 hours. Termination impedance: 200 ohms.
Peak to Peak Noise
∙Measures the peak to peak voltage of steady state noise signals.
∙Range: 0 to 3,000 mVpp into 100 ohms.
∙Bandwidth: 3dB from 40 kHz to 30 MHz
