Microtest TSB-67 - 568A Annex E User Interface, Environmental, Measurement Ports, Serial Port

∙Battery life: 8+ hours operation

∙AC: 9V DC - 1 amp AC adapter for continuous operation or charging

User Interface

∙x 64 Graphic LCD with backlight

∙cm x 3.8 cm (2.25” x 1.5”) display area

∙Elastomeric keypad with tactile feedback, numeric input, dedicated functions, 4 soft functions and cursor pad

∙Context-sensitive help and operating instructions

∙Tone generation audio for warning or other user feedback

∙Date stamp of all tests

Environmental

∙Operating Temperature: 0 to 50° C (32 to 122° F)

∙Storage Temperature: -10 to 55° C (14 to 131° F)

∙Operating Humidity (non-condensing): 10 to 90%

∙Storage Humidity: 5 to 95%

Measurement Ports

∙PentaScanner+: BNC and 36-pin connector that withstands in excess of 20,000 mating cycles

∙PentaScanner/PentaScanner Cable Admin: BNC and shielded Modular 8 (RJ-45) connector

∙Testing of all four pairs on RJ-45 is fully supported

Serial Port

∙Connector, Cable: DB-9

∙	Baud rate:	300 to 38,400 baud
∙	Parity:	NONE
∙	Length:	8 Bits
∙	Handshaking:	None, RTS/CTS, and XON/XOFF

Memory

∙Control: Flash memory allows electronic upgrading in remote locations

∙Test Storage: Up to 500 complete Autotest results can be stored in permanent flash memory (PentaScanner+). Up to 500 complete Autotests results can be stored in battery-backed memory (PentaScanner, PentaScanner Cable Admin)

Autotest Functions

∙Full suite of tests to determine if cable meets generic cabling or network type requirements (TIA/EIA TSB-67, ISO Class C, D, 10-BASE-T, Token Ring, Fast Ethernet, ATM 155 etc.)

∙Up to 20 user definable Autotest programs

Wire Map

∙Uses Injector for complete mapping of wiring at both ends of the cable

∙Finds miswires, opens, shorts, split pairs

∙Includes test of shield if connected