Motion Computing LE1600TC, AB52242 manual RJ-45/LAN

Chapter 1 Getting Started with Your Tablet Client

Tablet Client LEDs, Buttons, Connectors, and Other Components
PC card slot	Holds one Type-II PC Card for memory expansion, Smart Card
SD card Slot	Holds one SD-type card, for memory expansion (SDIO compatible)
Infrared (IrDA)	An infrared transceiver built into the Tablet Client. Allows communication with
transceiver	other devices compliant with the IrDA standard. Effective range is approximately
	3 feet
Power switch	Turns the Tablet Client on and off; can be configured to activate Stand By mode
DVI-D connector	A digital video interface digital connector for attachment to a digital video
	interface monitor. An optional DVI-D cable is available from Motion Computing.
	To use a digital video interface monitor you must use this cable with your Tablet
	Client.
AC power port	AC point of connection for the AC adapter
RJ-45/LAN	Standard RJ-45 connector for a 10/100/1000 Mbps network
VGA connector	A standard DB-15 monitor connector for an external monitor, projector, or other
	VGA device
Docking connector	Connects the Tablet Client with the Motion FlexDock for the LE series (not
	pictured in the illustration)
USB ports (2)	Universal Serial Bus; a port for connecting USB 2.0 devices, such as a storage
	device, mouse, printer, digital camera, or optical disk drives. You may need to
	install drivers for these devices; consider your available system space when
	installing drivers.
Audio input/output (2)	Microphone and headset plug; 3.5 mm plug
Speakers (2)	Integrated speakers that are muted when you connect a headset or external
	speakers
Fingerprint reader	Swipe-type sensor for scanning fingerprints; used for password management
	and security; also serves as a scroll device in active application window
Ambient Light Sensor	Measures the background light and automatically balances display brightness
Air vent	Active cooling system vent, dissipates heat from the Tablet Client (side and
	back) (not pictured in the illustration)
External battery	An external battery connector is included on the backside of the Tablet Client. It
connector	is located under a sliding panel in the upper center of the chassis. The sliding
	panel must be opened before attempting to attach the Extended Battery.

8Motion Computing LE1600TC Tablet Client User Guide