!
WARNING
This equipment generates, uses, and can radiate
If any modifications are made to the product, the modifier assumes responsibility for radio frequency interference issues. Changes or modifications not expressly approved by Motorola Computer Group could void the user’s authority to operate the equipment.
European Notice: Board products with the CE marking comply with the EMC
Directive (89/336/EEC). Compliance with this directive implies conformity to the
following European Norms:
EN55022 “Limits and Methods of Measurement of Radio Interference Characteristics of Infor- mation Technology Equipment”. Tested to Equipment Class B.
EN
EN
EN
EN
EN
EN
In accordance with European Community directives, a “Declaration of Conformity” has been made and is on file at Motorola, Inc. - Computer Group, 27 Market Street, Maidenhead, United Kingdom, Sl6 8AE.
This board product was tested in a representative system to show compliance with the above mentioned requirements. A proper installation in a
For minimum RF emissions, it is essential that you implement the following conditions:
1.Install shielded cables on all external I/O ports.
2.Connect conductive chassis rails to earth ground to provide a path for connecting shields to earth ground.
3.Tighten all front panel screws.
The product also fulfills EN60950 (product safety) which is essentially the requirement for the Low Voltage Directive (73/23/EEC).
