Motorola MVME2400 manual Table B-1. MVME240x Specifications, Characteristics Specifications

BSpecifications

B

Specifications

The following table lists the general specifications for the MVME240x VME processor module. The subsequent sections detail cooling requirements and EMC regulatory compliance.

A complete functional description of the MVME240x boards appears in Chapter 3. Specifications for the optional PMCs can be found in the documentation for those modules.

Table B-1. MVME240x Specifications

Characteristics		Specifications
MPU	MPC750	SPECint95
	233 MHz	(estimated =
		5.2 @ 60ns EDO to 8.7 @ 50ns EDO)
		16KB/16KB I/D on-chip cache
	MPC750	SPECint95
	350 MHz	10.8 @ 50ns EDO
		32KB/32KB I/D on-chip cache
Memory	SDRAM	32MB, 64MB, or 128MB
		ECC-protected
	Flash	1MB via two 32-pin PLCC sockets
		8MB via surface mount
TOD clock device	M48T559	8KB NVRAM
Timers	One watchdog timer; time-out generates reset
	Four real-time 16-bit programmable timers
Power requirements,	+12Vdc, 0mA	+5Vdc (±5%), 4A typical, 4.75A maximum
with no PMCs installed	–12Vdc, 0mA	with MP603
(See Note)	(typical)
		+5Vdc (±5%), 4.5A typical, 5.5A maximum
		with MP604
Operating temperature	0°C to 55°C entry air with forced-air cooling (refer to Cooling
	Requirements section)
Storage temperature	–40°C to +85° C

B-1