Motorola manual Preparing and Installing the MVME2400-Series Module

1

Preparing and Installing the MVME2400-Series Module

Inserting or removing modules with power applied may result

! in damage to module components.

Caution

!	Dangerous voltages, capable of causing death, are present in
	this equipment. Use extreme caution when handling, testing,
Warning	and adjusting.

3.If the MVME240x has already been installed in a VMEbus card slot, carefully remove it. Lay the MVME240x flat, with connectors P1 and P2 facing you.

Avoid touching areas of integrated circuitry; static discharge

! can damage these circuits.

Caution

4. Remove the PCI filler plate from the selected PMC slot in the front panel of the MVME240x. If installing a double-width PMC, remove the filler plates from both PMC slots.

1-14 Computer Group Literature Center Web Site