6

Modifying the Environment

Remote Start Method Switch [G/M/B/N] = B?

The Remote Start Method Switch is used when the MVME2400 is cross-loaded from another VME-based CPU, to start execution of the cross-loaded program.

GUse the Global Control and Status Register to pass and start execution of the cross-loaded program. This selection is not applicable to the MVME2400 boards.

MUse the Multiprocessor Control Register (MPCR) in shared RAM to pass and start execution of the cross- loaded program.

BUse both the GCSR and the MPCR methods to pass and start execution of the cross-loaded program. (Default)

NDo not use any Remote Start Method.

Probe System for Supported I/O Controllers [Y/N] = Y?

YAccesses will be made to the appropriate system buses (e.g., VMEbus, local MPU bus) to determine the presence of supported controllers. (Default)

NAccesses will not be made to the VMEbus to determine the presence of supported controllers.

Auto-Initialize of NVRAM Header Enable [Y/N] = Y?

YNVRAM (PReP partition) header space will be initialized automatically during board initialization, but only if the PReP partition fails a sanity check. (Default)

NNVRAM header space will not be initialized automatically during board initialization.

6-4

Computer Group Literature Center Web Site

Page 106
Image 106
Motorola MVME2400 manual Remote Start Method Switch G/M/B/N = B?