Select the identifier. Default =

ENV - Set Environment

Network PReP-Boot Mode Enable [Y/N] = N?

YEnable PReP-style network booting (same boot image from a network interface as from a mass storage device).

NDo not enable PReP-style network booting. (Default)

Negate VMEbus SYSFAIL* Always [Y/N] = N?

YNegate the VMEbus SYSFAIL∗ signal during board initialization.

NNegate the VMEbus SYSFAIL∗ signal after successful completion or entrance into the bug command monitor. (Default)

SCSI Bus Reset on Debugger Startup [Y/N] = N?

YLocal SCSI bus is reset on debugger setup.

NLocal SCSI bus is not reset on debugger setup. (Default)

Primary SCSI Bus Negotiations Type [A/S/N] = A?

AAsynchronous SCSI bus negotiation. (Default)

SSynchronous SCSI bus negotiation.

NNone.

Primary SCSI Data Bus Width [W/N] = N?

WWide SCSI (16-bit bus).

NNarrow SCSI (8-bit bus). (Default)

Secondary SCSI identifier = 07?

Select the identifier. (Default = 07.)

http://www.mcg.mot.com/literature

6-5