Motorola MVME2400 manual Solving Startup Problems

D

Solving Startup Problems

Table D-1. Troubleshooting MVME240x Modules (Continued)

Condition	Possible Problem			Try This:
II. There is a display	A. The keyboard or		Recheck the keyboard and/or mouse connections and power.
on the terminal,	mouse may be
but input from the	connected
keyboard and/or	incorrectly.
mouse has no
	B. Board jumpers		Check the board jumpers per this manual.
effect.
	may be configured
	incorrectly.
	C. You may have		Press the HOLD or PAUSE key again.
	invoked flow		If this does not free up the keyboard, type in:
	control by pressing		<CTRL>-Q
	a HOLD or PAUSE
	key, or by typing:
	<CTRL>-S
III. Debug prompt	A. Debugger Flash		1. Disconnect all power from your system.
PPC1-Bug> does	may be missing		2. Check that the proper debugger devices are installedl.
not appear at	B. The board may		3. Reconnect power.
powerup, and the
	need to be reset.		4. Restart the system by “double-button reset”: press the RST and
board does not
			ABT switches at the same time; release RST first, wait seven
autoboot.
			seconds, then release ABT.
			5. If the debug prompt appears, go to step IV or step V, as indicated.
			If the debug prompt does not appear, go to step VI.
IV. Debug prompt	A. The initial		1. Start the onboard calendar clock and timer. Type:
PPC1-Bug>	debugger		set mmddyyhhmm <CR>
appears at	environment		where the characters indicate the month, day, year, hour, and
powerup, but the	parameters may be		minute. The date and time will be displayed.
board does not	set incorrectly.
autoboot.
	B. There may be some
	fault in the board	!		Performing the next step (env;d)
	hardware.			will change some parameters that
			Caution	may affect your system’s
				operation.
				(continues>)

D-2 Computer Group Literature Center Web Site