National Instruments BridgeVIEW - page 182

Chapter 7 Advanced Application Topics
BridgeVIEW User Manual 7-14 © National Instruments Corporation
A user’s BridgeVIEW Environment privileges are completely independent
of the user’s access level, and do not directly affect access to objects in the
operator interfaces that you develop for your application. See the Operator
Interface Security section in this chapter for more information.
Project
Privileges Configure Log File Locations User can use the Tag Configuration Editor to edit the historical and event logging
configuration of a tag configuration, but can
not create, delete, or edit tags.
Create/Edit Tags User can create, delete, and edit tags in the
Tag Configuration Editor.
Use Interactive
Server Tester User can launch the Interactive Server Tester; this privilege can be configured only
if the VI Server Developer Toolkit is
installed.
Engine
Privileges Start/Stop Engine User can start and stop the Engine via the Engine Manager.
Start/Stop Historical Logging User can start and stop Historical Logging
via the Engine Manager.
Start/Stop Event Logging User can start and stop Event Logging via
the Engine Manager.
Start/Stop Printing User can start and stop Event Printing via the
Engine Manager.
Security
Privileges Change Password User can change his or her own password.
Create/Edit Access Levels Using the Access Levels dialog box, the user
can add, remove, and edit access levels lower
than his or her own access level.
Create/Edit User Accounts User can create and edit user accounts which
have an access level lower than his or her
own access level.
Configure User Privileges User can change the privileges assigned to
other users who have an access level lower
than his or her own. This privilege requires
that the user also have the Create/Edit User
Accounts privilege, described above.
Table 7-1. Assignable BridgeVIEW Privileges (Continued)
Type Privilege Description