Chapter 8 | VisuaLink 128/384 User Guide |
8.5.3 Remote switching
To switch the transmitted picture sent from the remote site:
①Press the FAR END button.
.
Irving
FAR END
Remote control: Camera 1
The system switches control from local to remote control. This is indicated by the local message.
Note: Image as seen by the local site.
➁Press the MAIN CAM or CAM 2 button. The far site sends the camera selected.
➂When CAM 2 button is pressed:
MAIN CAM
CAM 2
Irving
Remote control: Camera 2
Note: Image as seen by the local site.
Page |
