VisuaLink 128/384 User Guide | Chapter 4 |
|
|
STEP | ACTION |
7.Locate the cable bundle and remove from packing box. The cable bundle contains two (2) 5 in. (12 cm.) Velcro strips. Use these strips to mount the camera to the top of the monitor.
8.Locate the camera box and remove camera.
DRAWING
Foam Inserts
Polyethylene
Bag
Packing Carton
9.Set the IR switch on the Sony D30 camera to the ON position. The IR switch is located on the bottom of the Sony D30 camera. This will allow for the Sony Camera to receive the IR codes from the VisuaLink remote controller and transmit them to the VisuaLink Codec for control.
Mount the camera on the top of monitor, using the Velcro strips. Make sure the front of the camera is flush with the front of the monitor and the camera is centered.
Velcro Strips |
IR OUT |
Switch |
Page |
