Appendix D | VisuaLink 128/384 User Guide |
2.The network provider provisions the correct ISDN BRI and completes the following list of questions.
ISDN BRI Service Specification needed:
As defined by Bellcore; the ISDN BRI simplified ordering code is
•The ISDN BRI protocol National
•The ISDN BRI service must be terrified and available from the customer’s local central office.
•The D channel should not permit X.25 packet data
•The ISDN BRI service must allow videoconferencing calls to be dialed on either B channel or on both simultaneously
•Both B channels must carry
•The ISDN BRI Line requires one or two different SPID number.
•The ISDN BRI service must be configured as a Terminal Type A
•The ISDN BRI service must be automatic Terminal Endpoint Identifiers (TEIs)
A.User requires an (NT1) to use the ISDN BRI service ( ) Yes ( ) No
B.If Yes, the ISDN BRI network provider can ( ) or cannot ( ) supply it.
C.If the ISDN BRI network provider cannot supply the needed NT1, and then who is recommended supply.
Name;
Company:
Phone #:
D.Did the ISDN BRI service pass a loop qualification test at the user site listed
Yes ( ) | No ( ) |
Note: The ISDN BRI must pass a loop test at the user site before installation begins.
E.Check one of the following.
( | ) | The users ISDN BRI line doesn't require a Service Profile Identifier | ||
|
| (SPID) number for installation. |
| |
( | ) | The user’s ISDN BRI line requires one SPID number and one director | ||
|
| number (also called) | ||
|
| SPID # |
| Sub Address # |
| ( ) | The user’s ISDN BRI line requires two SPID number and two | ||
|
| directory numbers for installation |
| |
|
| SPID 1 | # | Sub Address 1 # |
|
| SPID 2 | # | Sub Address 2# |
Page |
