VisuaLink 128/384 User Guide | Chapter 4 |
|
|
Chapter 4 Application Setup
4.1 Guidelines | The following are key points when installing the VisuaLink. | |
| (1) | The VisuaLink should be installed on a flat surface. It is not recommended |
|
| that the unit be installed on its side. |
| (2) | Please allow for 2 inches (6 centimeters) on both sides of the equipment for |
|
| ventilation. |
| (3) | Allow the front of the unit to be visible. |
| The following are the specifications for the IR receiver/transmitter. | |
| (1) | The receiver is able to receive an IR signal up to 20 feet (6 meters). |
| (2) | The IR receiver should be able to receive a signal at an angle of 30 degrees |
|
| or less from the left to right. |
| (3) | The IR receiver should be able to receive a signal at an angle of 15 degrees |
|
| or less from the top to bottom. |
Please place only light objects on the equipment such as a telephone.
Page |
