Chapter 5 | VisuaLink 128/384 User Guide |
The setting screen is displayed. The current setting is displayed.
|
| ▲ Speed | : < 128Kb/s > |
| ||
|
| Incoming mode | : < Select > |
|
| |
|
| Number of rings | : <1> |
|
| |
|
| Restricted dial No. : [2222] |
|
| ||
|
| Call restriction | : < | No limit | > |
|
|
| Register speed dial : < | Allowed | > |
| |
| Press ENTER after choosing. |
|
| |||
|
|
|
| |||
Speed: | Sets the default transmission rate. What ever rate is set, | |||||
|
| this is the rate shown in the dialing screen. | ||||
Incoming mode: | Sets the incoming call mode. Posible settings are: | |||||
|
| Auto - automatically answers the call. | ||||
|
| Manual - the user must answer the call with the remote. | ||||
|
| Select - Only answers calls that are stored in the speed | ||||
|
| dial. |
|
|
|
|
Number of rings: | The number of rings required before the system answers | |||||
|
| the call. |
|
|
|
|
Restricted dial No.: | Allows the user to set caller restriction number. | |||||
Call restriction: | Allows the user to set a call restriction. Possible settings | |||||
|
| are: |
|
|
|
|
|
| No limit - the user can place calls with no restrictions. | ||||
|
| Speed dial only - the user can only place calls that are | ||||
|
| stored in the speed dial register. | ||||
|
| Manual dial inhibited - the user cannot place manual | ||||
|
| calls. |
|
|
|
|
Register speed dial: | Allows the user to set access level for speed dial | |||||
|
| registrations. Possible settings are: | ||||
Allowed - allows the user the access to set speed dial. Disabled - the user is not allowed to access the speed dial registration.
Note 1: To select an item use the up and down portion of the CAMERA CONTROL button.
Note 2: To change a setting use the left and right portion of the CAMERA CONTROL button to toggle through the item.
➂Press ENTER button to define it after changing a setting.
➃Press the MENU or CANCEL button three (3) times to proceed back to the video image.
Page |
