VisuaLink 128/384 User Guide | Chapter 4 |
|
|
Step
Key in the number of one of the following applications.
Applications:
1.Rollabout/Other
2.Data Conference
3.Gateway
4.Desktop
Press CANCEL to page back
Congratulations Screen
Congratulations, you have just finished setting up your VisuaLink system.
For VisuaLink software updates and general VisuaLink knowledge, visit the NEC Knowledge base web site at :
http://www.cng.nec.com or http://www.ilibrary.com/phoenix/ntachome.nsf /homepagenav?opennavigator
-You may begin to use the video conferencing system immediately.
-Press ENTER to activate your configuration.
Press CANCEL to page back
The VisuaLink is now setup for the configuration you have entered. Press the ENTER button on the REMOTE CONTROLLER, the VisuaLink will display a blue screen and recycle. The VisuaLink should will power up to a normal state. You may begin to use the video conferencing system immediately.
Note: If there are no My Numbers entered in the configuration the VisuaLink will display the Start Up screens.
Page |
