Chapter 6 | VisuaLink 128/384 User Guide |
Place Manual Dial Call
|
| Phone Number 1 | |
ENTER | ▲ | [ | ] |
|
| Phone Number 2 | |
|
| [ | ] |
|
| Speed | : <128kb/s> |
| Press ENTER or CALL after entering | ||
| Press CANCEL to go to Call Screen | ||
NUMBER |
|
|
|
|
|
| |
Checking Operation
Verify that local and remote sites are able to be seen and heard at the remote ends. Verify that a control from the remote controller is normal by referring to Chapter 8 Operation Method.
If unable to connect to the remote site it maybe because the remote site is busy, wait and then repeat the above operation. If the operation persist, proceed to Chapter 9 Troubleshooting.
➂Enter the first telephone number using the NUMBER buttons,.
Note 1: When pressing down side on CAMERA CONTROL button after the first number is completed, the number is copied to PHONE NUMBER 2. This is done because typically when dialing two (2) BRI numbers, the PHONE NUMBER 2 number sometimes exactly match or is similar to the first number.
Note 2: At any time you may press the CALL button and ENTER button. This will immediately place a video call to the
Page |
