NEC 128/384 manual Camera Preset Menu, Registering the camera preset position ➃ Press Enter button

VisuaLink 128/384 User Guide Chapter 7

7.3Camera Preset Menu

During a videoconference, you may want the camera to point at a particular person or location, such as at the main speaker or at a flipchart. Camera presets are buttons that let you store camera positions for the main and sub-camera. After you set a camera preset, all you have to do is press one numerical button to make the main or sub-camera move to that stored preset.

To set camera preset button:

①Set the camera to the desired position. Adjust the image using CAMERA CONTROL and ZOOM buttons. Keep doing this until the camera is showing the image exactly the way you want it.

➁Press the MENU button to display the on-screen icons.

➂Select REGISTRATING THE CAMERA PRESET POSITION icon using the left or right side of the CAMERA CONTROL button.

CAMERA CONTROL

ENTER

▲

Registering the camera preset position.

➃Press ENTER button.

Camera Preset Select : <NEAR END>

Press ENTER after choosing.

Note: Camera preset selection allows two setting: NEAR END and FAR END.

NDA-24230 Issue 2.0 Page 7-7