VisuaLink 128/384 User Guide | Appendix B |
|
|
Appendix B Software Upgrade Instructions
MENU
CALL
PAGE UP
CAMERA
CONTROL
ENTER
NUMBER
This appendix contains instructions for upgrading your VisuaLink 128 system software. If you have any question about the upgrade, please call your videoconferencing provider.
Upgrade Instructions
To upgrade your system, all you need to do is dial into a software upgrade server from your system. The server will recognize your system and upgrade your system automatically. When the upgrade is complete, you restart your system and do an environmental initialization.
Upgrade to the latest version
1.Press CALL button on the wireless remote controller.
2.Select the menu item: PLACE MANUAL DIAL CALL.
3.Enter the Software upgrade server phone #.
∙Phone number 1:
∙Phone number 2:
Note: Depending on your network, you may have to enter a prefix before the number.
4.Select a speed of <128kb/s>
∙When the call connects, Call connected appears, and the update begins automatically. When the upgrade is complete, the system asks you to restart the system.
5.Press CALL
Place Manual Dial Call
Phone Number 1
▲ | [ | ] |
| Phone Number 2 | |
| [ | ] |
| Speed | : <128kb/s> |
Press ENTER or CALL after entering
Press CANCEL to go to Call Screen
∙When the call connects, Call connected appears, and the update begins automatically. When the upgrade is complete, the system asks you to restart the system
6.When the upgrade is complete, restart your system and environmental initialize.
Note: The speed setting in the CODEC should be set to 128 no matter which system is being upgraded.
Page |
