Page 4-8 NDA-24230 Issue 2.0
Chapter 4 VisuaLink 128/384 User Guide
➈Connect the VisuaLink AC Power.
Using the provided AC transformer power cable, plug the power cable into
the VisuaLink connection marked DC-IN-5V. Plug the other end into the AC
POWER STRIP.
4.2.3 Desktop Configuration
Step-by-step procedures for installating the VisuaLink system in a desktop
application.
Equipment to Connect
Parts List
No. Name Note
1 VisuaLink 128 or VisuaLink 384 CODEC Engine.
2 Microphone Generic Microphone to allow for the transmission of
audio.
3 Stand-type Camera Generic camera to allow for the transmission of video.
4 PC (Provided by customer) Your personal PC with a monitor. PC should have
audio input capability.
5 Video Capture Card Allows for the input of a video image into a PC.
6 Director Software Allows for VisuaLink control via PC. Software may be
downloaded from Web site:
http://www.cng.nec.com/html/products.htm
1. Click on the NTAC icon or select
SUPPORT from the menu bar at the top of the
screen.
2. At the CNG SUPPORT screen, click on the NTAC
Online text.
3. At the National Technical Assistance Center
screen, click on the Downloads
icon or the Downloads text on the
menu bar.
4. At the Downloads screen, click on the Arrow icon
at the top or bottom of the screen until
you come to Video-VL128/384.
5. Click on the , then click of the Visua Link
Director for VL128/VL384 text that is highlighted
in blue.
Note: If you have a problem with this procedure,
please call the NTAC support line at 1-800-852-
4632.
▲▲