NEC 128/384 - page 131

NDA-24230 Issue 2.0 Page 8-11
VisuaLink 128/384 User Guide Chapter 8
8.7 Send a Snapshot During a meeting, you may want to distribute copies of a diagram or pass around
an illustration so that everyone can take a closer look at what you are discussing.
You can do the same in a videoconference by se ndi ng a snapshot. A snapshot is a
picture like an electric photograph that you can send to the far-end.
8.7.1 Send a snapshot
①Press either the MAIN CAM or CAM 2 button to view the image from the
camera.
➁Adjust the image using the CAMERA CONTROL and/or ZOOM button;
keep doing this until the camera is showing the image exactly the way you
want it.
➂Press SEND button in the SNAPSHOT area. The snapshot appears on the
far-end screen and on your screen and whatever you were viewing at the far-
end appears in your PIP. Whenever a snapshot appears, you also see the
message STILL at the upper left corner of the screen. This is your i ndic ation
that a STILL is being shown in the monitor.
CAM 2
MAIN CAM
ZOOM
CAMERA
CONTROL
Irving
Sending a Snap Shot.
Local control: Camera 2
SEND
RECEIVE