Chapter 4

VisuaLink 128/384 User Guide

Remote Controller Directions:

Gives some general directions for configure the VisuaLink system. Using the Remote controller highlight the NEXT option to advance to the configure screen or press the lower portion of the CAMERA CONTROL key to highlight the Configure Later to advance to the normal ICON screens. If you choose to configure later, the system will have to be programmed with My numbers and SPID’s in order to work correctly.

Part 1- Remote Controller Location

- Locate the CAMERA control.

The CAMERA control key is the BLUE round key. Use this key to move the Cursor up/down and Left/Right in the Configuration Screens.

-Locate the ENTER key on the Wireless remote controller.

Use the ENTER key to confirm selections and store information.

Next screen Prior screen

4.4Setting Up your The following is a description of BRI Line setup

ISDN Line Information

Part 2- Setting up Your ISDN Line Introduction:

When ordering BRI service, you will usually get 2 My numbers and 2 SPID numbers per BRI.

A SPID normally consists of the user’s 3 digit area code, 7 digit ISDN telephone number, followed by a 0101. Ex:

MY Number 1: 9727195854

SPID 1: 97271958540101

Note: The VisuaLink 128 requires 2 My numbers

and 2 SPID #, while the VisuaLink 384 Note is yellow. requires 6 My numbers and 6 SPID #.

Next screen Prior screen

Page 4-24

NDA-24230 Issue 2.0

Page 52
Image 52
NEC 128/384 manual Isdn Line Information