CHAPTER 1 NDA-24296
Page 2
Revision 1.0
2. MOUNTING LOCATION OF CIRCUIT CARD
The contr ol circuit card s for the 1 IMG system should be mounte d in their dedicated slot s a s shown in Figure 1-
1. The cont rol circu it cards for the 4 IMG system should be mount ed in their dedicated slots as shown in Figure
1-2. The control circuit cards for the IPX-U system should be mounted in their dedicated slots as shown in
Figure 1-3 and 1-4.
As a general rule, the b lue pull tab line/trunk c ircuit card s a re mounted in the univ ersal slots that are locat ed in
Slot s 0 4 - 12 and 15 - 23 of t he Por t Interface M odule (PIM).
The yellow pull tab line/trunk circuit cards (MISC) are mounted in Slots 00 - 02 of the LPM.
Additional GT/LANI cards are mounted in the CPR.