NEC 2400 ipx - page 212

CHAPTER 3 NDA-24296

Page 186

Revision 1.0

PH-CK16

Phase Lock Oscillato r

5. Switch Settings

Standard settings of switches on this circuit card are shown in the table below.

SWITCH

NAME SETTING STANDARD

SETTING MEANING

MB UP C irc uit card Ma ke- busy.

DOWN ×C ircui t card Ma ke- busy can c el.

SW03 1 - F 1 Fixed to “1.”

SWITCH

NAME SWITCH

NO. SETTING STANDARD

SETTING MEANING

SW01

1ON ×Clock subordinate office.

OFF Clock sour ce office.

2ON Digital Clock Supply route zero (DCS 0) is u sed.

OFF Digital Clock S upply route zero (DCS 0) is not used.

3ON Digital Clock S upply route one (DCS 1) is used.

OFF Digital Clock Supply route one (DCS 1) is not used.

ON 8 KHz of Frame Head signals are extracted from the DCS

signals (w hich is composed of 64 KHz + 8 KHz).

OFF 8 KHz of Fram e Head signals are not extracted from the DCS

signals (w hich is composed of 64 KHz + 8 KHz).

ON When clock source f ailure has occurre d in all suppl y r oute s, th e

P L O outputs the orig ina l cl o ck of th e int er n al os ci llat o r.

OFF When cl ock so urce fa ilure h as not o ccurre d in all supp ly rou tes,

the PLO continues out putting the current phase c lo c k.

6ON This circuit card is associated with SYNC (PA-CK16) card and

5 m Frame Pulse (FP) is supplied by the SYNC card.

OFF This circuit card is not associated with SYNC (PA-CK16) card.

7ON A-law CODEC is used for the hold music.

OFF ×µ-law CODEC is used for the hold music.

8OFF ×Not used.

Contents

Main Page Page Page Circuit C ard Manual Circuit C ard Manual NDA-24296 Page Circuit C ard Manual Circuit C ard Manual NDA-24296 Page Page Page Circuit C ard Manual Page NEAX2400 IPX Circuit Card Manual TABLE OF CONTENTS TABLE OF CONTENTS (CONTINUED) LIST OF FIGURES Page Page Page Page Page Page Page LIST OF TABLES Page CHAPTER 1 INTRODUCTION Page NDA-24296 CHAPTER 1 Page 3 Figure 1-1 C a rd Mounting Slot for the 1 IMG Syst em Page 4 Figure 1-2 Card Mounting Slot for the 4 IMG System (1/4) Page 5 Figure 1-2 Card Mounting Slot for the 4 IMG System (2/4) Page 6 NEAX240 0 IMS (IPX ) Figure 1-2 Card Mounting Slot for the 4 IMG System (3/4) Page 7 NEA X24 00 IM S (IPX) Figure 1-2 Card Mounting Slot for the 4 IMG System (4/4) Page 8 Note: The 2nd IOC card (optional) may be mount ed in the slot. Figure 1-3 Card Mounting Slot for the IPX-U System (1/5) Page 9 Figure 1-3 Card Mounting Slot for the IPX-U System (2/5) Page 10 Figure 1-3 Card Mounting Slot for the IPX-U System (3/5) Pag e 11 Figure 1-3 Card Mounting Slot for the IPX-U System (4/5) Page 12 Figure 1-3 Card Mounting Slot for the IPX-U System (5/5) Pag e 13 FANU Note: The 2nd IOC card (optional) may be mounted in this slot. DUMMY Figure 1-4 Card Mounting Slot fo r the IP X-UMG System (1/ 5) Page 14 Figure 1-4 Card Mounting Slot fo r the IP X-UMG System (2/ 5) Pag e 15 Figure 1-4 Card Mounting Slot fo r the IP X-UMG System (3/ 5) CHAPTER 1 NDA-24296 Page 16 Figure 1-4 Card Mounting Slot fo r the IP X-UMG System (4/ 5) Pag e 17 Figure 1-4 Card Mounting Slot fo r the IP X-UMG System (5/ 5) Page CHAPTER 2 CONTROL CIRCUIT CARD REFERENCE SN1695 CPR BF- A CPU Board Page Page Pag e 23 LMG0 CMG Figure 2-3 The SN1695 CPRBF-A in the IP X-UMG System Page Pag e 25 [CPR for 1-IMG/4-IMG/IPX-U System] Figure 2-5 Front View of CPR Note: This card is mounted in the IMG0 of the IPX-U system only. FDD/HDD(PZ-IO27/28) DSP(PZ-DK224) Note Page 26 [CPR in SP for IPX-UMG Syst em] [CPR in CMP for IPX-UMG System] DSP(PZ-DK224) LANI(PZ-PC22) ISAGTA (PZ-M565) MEM(PZ-ME44) [CPR in LP for IPX-UMG System] Note: This card is required when IMG2/6/10/14 and/or IMG3/7/11/15 is configured. Page the processing failed. Page [Lamp Indicat ions for the CPR in LP] meaning the processing failed. [for 1-IMG/4-IMG/IPX-U System] accessed. CPRRST switch on the DSP is pressed while se tting the SENSE switch. [for IPX-UMG System] accessed. This switch is used on the CPR mounted in SP only. on the CPR of system #0 and #1 in dual configuration. system applies High Density system configuration (i.e., a LP controls two IMGs) only. system. The same PBI Number must be assigned to both #0 and #1 processors in dual configuration. CPRRST switch on the DSP is pressed while se tting the SENSE switch. See the NEAX2400 IPX Installation Manual. Page 40 PH-GT09 Gate Figure 2-9 Location of PH-GT09 (GT) Card in the System PH-GT09 Gate Page Page Pag e 43 PH-GT10 Input Output Gate Figure 2-11 Location of PH-GT10 (IOGT) for IPX-U System PH-GT10 Input Output Gate Page 44 PH-GT10 Input Output Gate Figure 2-12 Location of PH-GT10 (IOG T) for IPX-UMG System Page Page PA-PC94 Data Link Multiplexer Page Page Page PA-PW54-A Dual Power Page Pag e 53 PA-PW54-A Dual Power Figure 2-17 Face Layout o f PA-PW54-A (DPWR) Card The face layout of lamps, switches, and connectors on this circuit card is shown in Figure 2-17. This ci rcu i t card ha s the fo llo w i n g s w itche s . Page PA-PW54-B Dual Power Page Page 58 PA-PW54-B Dual Power Figure 2-19 Face Layout of PA-PW54-B ( DPWR) Card The face layout of lamps, switches, and connectors on this circuit card is shown in Figure 2-19. This ci rcu i t card has the followi n g s w itche s. Page PA-PW55-A Power Page Pag e 63 PA-PW55-A Power SIDE VIEW Figure 2-21 Face Layout of PA-PW55-A Card The face layout of lamps, switches, and connectors on this circuit card is shown below. -48V SW FUSE FUSE SW4 FRONT VIEW This ci rcu i t card ha s the followin g s witche s. Page PA-PW55-B Power Page Page 68 PA-PW55-B Power Figure 2-23 Face Layout of PA-PW55-B Card The face layout of lamps, switches, and connectors on this circuit card is shown in Figure 2-23. Page Page PH-DK10 Displa y Panel Controlle r Page 72 PH-DK10 Display Panel Controlle r Figure 2-24 Location of PH-DK10 (DSPC) KEY INFORMATION ALM INFORMATION This circuit card can be mounted in slot No.00 on SP of CMG. SP The face layout of lamps, switches, and connectors are shown in Figure 2 -25. Page Pag e 75 PH-DK10 Display Panel Controller Figure 2-26 Connection of Alarm Indicating Panel Page PH-IO24 Inpu t/Outp ut Contr o ller Page The table below shows lamp indications on this circuit card. Page 80 PH-IO24 Input/Ou tput Controller Figure 2-29 External Cable Connection for PH-I O24 (IOC) Page Page 82 PH-M22 Figure 2-30 Location of PH-M22 (MMC) in IPX-U System MMC Pag e 83 Figure 2 -31 Location of PH-M22 (MMC) in IPX-UMG System KEY INFORMATION ALM INFORMATION This circuit card can be mounted in the shaded slots shown below. LPM/CMP/LP The face layout of lamps, switches, and connectors are shown in Figure 2-32. Page Page 86 Page PH-M16 Line Test LPM 2 8 Pag e 91 PH-M16 Line Test MISC CONNECTOR 6. External Interface Circuit Card Backboard Connector Connector Name Slot Num ber LPM LPM Backboard MISC Circuit Card Backboard Connector MISC CONNECTOR 68PH EXMISC C ABLE MISC Connector Accommodation SWITCH NAME SWITCH SHAPE REMARKS Pag e 93 PH-PC36 Figure 2-37 Location of PH-PC36 (MUX) Card in the 1 IMG System Multiplexer Page 94 Figure 2-38 Location of PH-PC36 (MUX) Card in the 4 IMG System Pag e 95 Figure 2-39 Locati on of PH-PC36 (MUX) Card in the IPX-U/IPX-UMG System Page 96 Figure 2-40 PCM Highway Running Page Page Page Page 100 Figure 2-43 Cable Connec tions between the MUX an d the TSW Page PH-PC20 Data Link Controller Page Page PH-PC45 Emergency Alarm Controller The face layout of lamps, switches, and connectors is shown in Figure 2-47. Page Page Page Page 110 PH-PC45 Emergenc y Alarm Controller Figure 2-48 Connection of Alarm Indicating Panel and Music on Ho ld Page PH-PW14 Power S witch Page Page Page 115 PH-SW10 Figure 2-5 1 Location of PH-SW10 (TSW) Card in the System Page Page Page 118 This circuit card is mounted in PIM number zero (0) of the slot shown below. TSW #1 PIM0 Figure 2-54 Face Layout of PH-SW10 (TSW) The face layout of lamps, switches and connectors is shown in Figure 2-54. Page Page Page Page Page 123 Figure 2-55 PLO Connector Leads Location Page 124 Figure 2-56 Connecting Route Diagram DTI (PA-24DTR, PA-30DTS), and PRT (A-24PRT, PA-PRTC). The front cable connections are shown in Figure 2-57. Page Page 127 PH-SW12 Figure 2-58 TSW Configuration PH-SW12 [TSW configuration] [INT configuration] Page Page The definitions for the TSW 00 - TSW03/TSW10 - TSW13 are listed below. 4-IM G Syste m IPX-U system This card is mounted in the TSWM0/1 for the IPX-U system. For the card in TSWM0 For the c ard in T SW M1 The face layout of lamps, switches, and connectors is shown in Figure 2-61. Page Page Page 134 PU-SW00/PU-SW00-A Figure 2-62 Location of PU-SW00/PU-SW00-A (TSW) [ Page 135 Figure 2-63 Location of PU- SW00/PU-SW00-A (TSW) for IPX-U System Page 136 Figure 2-63 Location of PU-SW00/PU-S W00-A (TSW) for IPX-UMG System Page 137 This circuit card can be mounted in the shaded slots shown below. SWE5 Figure 2-64 Face Layout of PU-SW0 0/PU-SW00-A (TSW) Mounting Module ISWM TSW MB TSW MBR Page Switch settings for this circuit card are shown in the table below. See the NEAX2400 IPX Installation Manual. Page 140 PU-SW01 [ Figure 2-65 Location of PU-SW01 (HSW) Highway Switch Page 141 Figure 2-65 Location of PU-SW01 (HSW) for IPX-U System Page 142 Figure 2-65 Location of PU-SW01 (HSW) for IPX -U MG System Page Page Page Page 146 PZ-GT13 Industrial Standard Architecture Gat eway Figure 2-67 Location of PZ-GT13 (ISAGT) PZ-GT13 Industrial Standard Architecture Gateway Page 147 PZ-GT13 Industrial Standard Architecture Gat eway LPM Figure 2-69 External Interface for PZ-GT13 Figure 2-68 Location of PZ-GT13 (ISAGT) in the IPX-U System (I SW) The PZ-GT13 is located on the ISA bus which is allocated in the CPR as shown in Figure 2-69. PZ-GT13 (ISAGT) Page PZ-GT16 Industrial Standard Architecture Gateway LPM Page Page 152 PZ-GT20 Industry St andard Architecture Gateway Figure 2-74 Location of PZ-GT20 (ISAGT) PZ-GT20 Indu stry St and ard Ar ch ite c tu re Gate wa y Page Page Page 155 PZ-M565 Industry Standard Architecture Gateway Figure 2-78 External Interface for PZ-M565 PZ-M565 Indu stry St and ard Ar ch ite ctu re Ga te wa y PZ-M565 Figure 2-77 Location of PZ-M565 (I SAGT) C ard in the System CMP-CPR Page Page 157 PZ-ME44 PCI Memory Figure 2-81 External Interface for PZ-M44 PZ-ME44 PCI Mem ory PZ-ME44 Figure 2-80 Location of PZ-ME44 (PCI MEM) Card in t he System Page PZ-PC19 Page Page No switch settings are required. Page 163 PZ-PC22 Figure 2-87 Location of PZ-PC22 (LA NI) Card in the System PZ-PC22 The PZ-PC22 (LANI) card is accommodated on the PCI bus in the CPR as shown in Figure 2-88. PZ-PC22 Page Page Page 167 PZ-PC23 Figure 2-91 Location of PZ-PC23 (LA NI) Card in the System PZ-PC23 Page 168 PZ-PC23 LAN0 PCI bus ISA bus Fusion network is used, connect the Ether cable to LAN1 connector to establish Fusion link. PZ-PW92 PZ-PC23 SP-CPR 100M0 TXRX0 Page No switch settings are required. CHAPTER 3 LINE/TRUNK CIRCUIT CARD REFERENCE PA-CFTB 8-party Con fe ren ce Trunk PIM Page Page Page Page PA-CK14 Oscillator Page Page PH-CK16 Page Page This circuit card is mounted in the TSWM of the slot shown below. The face layout of l amps, swi tc hes, and connectors is shown i n Figure 3-7. SW8F SWAC SWAB Page Page Page Page Page 189 PH-CK16 Fi gure 3 - 8 LT Con nec tor Le ad Loc at ion of PLO (TSWM) Mounting Module TSWM Page 190 PH-CK16 MDFPBX Figure 3-9 Connecting Route Diagram Page PH-CK16-A Page 193 Figure 3-11 Location of PH-CK16-A (PLO) in IPX-U/IPX-UMG Syste m LN0/LMG0 (IMG2/IMG3) LN3/LMG3 (IMG2/IMG3) /(IMG14/IMG15) ~ from LN/LMG DTI from ~ LN/LMG DTI LN3/LMG3 (IMG0/IMG1) /(IMG12/IMG13) SEL PLL Drv ~~ TSWM(IMG1) ISWM TSWM0(IMG1/5/9/13) The face layout of l amps, swi tches, and connectors are shown in Figur e 3-12. SW10 is mounted in ISWM, this lamp is not used. The key setti ng of [Mounted in ISWM of IPX-U/IPX-UMG System or TSWM of 4-IMG System] (DCS or DTI) according to the clock network configuration for the office. [Mounted in TSWM0 of IPX-U/IPX-UMG System] clock can also be used as an alternate clock supply route in case of DCS clock failure. Page Page Page 202 EXCLK0 Installation Cable To Digital Interface and/or DCS REAR VIEW Figure 3-13 PLO Pin Assignments for Receiving Clock (4 IMG System) (2/2) Page 203 Installation Cable Figure 3-14 PLO Pin Assignment for Receiving Clock (ISWM) (2/2) Figure 3-14 PLO Pin Assignment for Receiving Clock (ISWM) (1/2) MDF Page Page 205 Figure 3-16 Cable Connect ion Diagra m (ISWM) for Receiving Clock fr o m Digital Interface MDF ISW/CMG Note 1: LN/LMG PCM Carrier Equipment DSU Note 1 Note 2 Page 206 Note: For the DUI connection route diagram, see Figure 3-18. Figure 3-17 LT Connector Lead Location of PLO (ISWM-TSWM0/1) Page 207 IMG Note 2 Note 1: Note 1 Note: FM1 is not used at this time. PH-CK17 Page Page This circuit card is mounted in the TSWM of the slot shown below. TSWM The face layout of l amps, swi tc hes, and connectors is shown i n Figure 3-22. SW06 SW05 SW04 Page Page Page Page Page 217 PH-CK17 Figure 3-23 LT Connector Lead L ocation of PLO ( TSWM) Mounting Module TSWM Page 218 PH-CK17 MDFPBX Figure 3-24 Connecting Route Diagram Page Page 220 PH-CK17-A Figure 3-25 Location of PH-CK17-A in 4-IMG System SEL PLL Drv Page 221 Figure 3-26 Location of PH-CK17-A (PLO) in IPX-U/IPX-UMG Syste m ~ from LN/LMG DTI from ~ LN/LMG DTI LN3/LMG3 (IMG0/IMG1) /(IMG12/IMG13) SEL PLL Drv ~~ TSWM0(IMG1) TSWM(IMG1) TSWM0(IMG1/5/9/13) ISWM The face layout of l amps, swi tches, and connectors are shown in Figur e 3-27: SW10 is mounted in ISWM, this lamp is not used. Page The key setti ng of [Mounted in ISWM of IPX-U/IPX-UMG System or TSWM of 4-IMG System] or DTI) according to the clock network configuration for the office. [Mounted in TSWM0 of IPX-U/IPX-UMG System] Page Page Page Page 231 EXCLK0 Installation Cable To Digital Interface and/or DCS REAR VIEW F ig u re 3 -28 PLO Pin Assign ments for R eceiving Cl ock (4 IM G) ( 2/ 2) Page 232 Installation Cable Figure 3-29 PLO Pin Assignment for Receiving Clock (ISWM) (2/2) Figure 3-29 PLO Pin Assignment for Receiving Clock (ISWM) (1/2) MDF Page Page 234 Figure 3-31 Cable Connection Diagram ( ISWM) fo r Receiving Clock from Digital Interface MDF ISW/CMG Note 1: LN/LMG PCM Carrier Equipment DSU Note 1 Note 2 Page 235 Figure 3-32 LT Connector Lead Location of PLO (ISWM-TSWM0/1) Note: For DIU connection route diagram, see the figure on the next page. Page 236 IMG Note 2 Note 1: Note 1 Note: FM1 is not used at this time. Page 237 Figure 3-34 Connection of External Music-On-Hold Page Page 239 PH-CK18 Clock ~ Figure 3-35 Location of PH-CK18 (C LK) PH-CK18 ~ Clock LN0/LMG0 (IMG2/IMG3) LN3/LMG3 (IMG2/IMG3 ) /(IMG14/IMG15) LN0/LMG0 (IMG0/IMG1) TSWM1(IMG2/6/10/14) Page Page 242 PH-CK18 Clock Figure 3-37 LT Connector Lead Location (ISWM-TSWM0/1) Page PA-8COTBJ Central Office Trunk The face layout of lamps, switches, and connectors of this circuit card is shown in Figure 3-39. Page Page 247 PA-8COTBJ Figure 3-40 LT Connector Leads Accommodation Page Page PA-16COTBE Central Office Trunk Page The face layout of lamps, switches, and connectors of this circuit card is shown in Figure 3-43. Standard settings of various switc hes on this circuit card are shown in the table below. Page are fixed to off. Page Page Page 258 PA-16COTBE Figure 3-44 LT Connector Leads Accommodation (1/2) Page 259 PA-16COTBE Figure 3-44 LT Connector Leads Accommodation (2/2) Page Page PA-CS02-C Attendant Interface The face layout of lamps, switches, and connectors on this circuit card is shown in Figure 3-47. Page SWITCH SWITCH Page 266 PA-CS02-C Group No. 232221201918171615141312111009080706050403020100 Accommodation of the LT connector leads of this circuit card is as shown in Figure 3-48. LT6 LT7 LT8 LT9 LT10 LT11LT0 LT1 LT2 LT3 LT4 LT5 231915 231915 Slot No. PIM MODULE SLOT NO. SWITCH NAME SWITCH SHAPE REMARKS PA-CS08 Hotel Attendant Interface The face layout of lamps, switches, and connectors on this circuit card is shown in Figure 3-50. Page Page 114, b7 = I. Page 273 PA-CS08 Hotel Attendant Interface Figure 3-51 LT Connector Lead Location (PIM) The location for the LT connector leads for this circuit card is shown in Figur e 3-51. Page PA-CS08-B Hotel Attendant Interface Page The face layout of lamps, switches, and connectors on this circuit card is shown below. Page Standard settings of various switches on this circuit card are shown in the table below. Page Page 281 PA-CS08-B Hotel Attendant Interface Figure 3-54 LT Connector Lead Accommodation Accommodation of the LT connector leads of this circuit card is as shown in Figure 3-54. Page PA-CS33 Attendant Interface The PA-CS33 (ATI) can be mounted in either Slot 12 or 23 of the PIM. The face layout of lamps, switches and connectors is shown in Figure 3-56. 5. Switch Setting Page initialization, regardless of the mode before the initialization. Page 288 Figure 3-57 LT Connector Lead Locat ion (PIM) Note: The lead for each DESK CONSOLE is shown below. Note: The lead for each ADD ON CONSOLE is shown below. Page 289 supplied to the DESK CONSOLE locally. Page 290 Figure 3-59 shows how to connect Desk Console. Note: GN D wires should be connected to P Z-M77. (BASE-U) G DESK CONSOLE Figure 3-59 Desk Console Connection If the distance exceeds the above, estimate it according to the calculation after Figure 3-60. Fig ure 3-60 Distance between PBX and Modular Rose tt e of Desk Console Page Page 293 The location of the LT connector leads for the TAS interface is as shown in Figure 3-61. 232221201918171615141312111009080706050403020100 Figure 3-61 LT Connector Lead Location (PIM) LT6 LT7 LT8 LT9 LT10LT0 LT1 LT2 LT3 LT4 LT5 1915 1814 1713 1612 231915 Page PA-8LCBR Page The face layout of lamps and switches on this circuit card is shown in Figure 3-63. Switches on this circuit card have the following meanings. OFF Page Page 300 PA-8LCBR Figure 3-64 LT Connect or Leads Accommodation Page Page PA-16LCBE Page Page Page Page Page Page Page Page 311 PA-16LCBE Figure 3-68 LT Connector Leads Accommodation (1/2) Figure 3-68 below. Page 312 PA-16LCBE Figure 3-68 LT Connector Leads Accommoda tion (2/2) Page Page PA-16LCBJ-A Page The face layout of lamps, switches, and connectors of this circuit card is shown in Figure 3-71. Page Page Page Page 321 PA-16LCBJ-A Figure 3-72 LT Connector Lead Accommodation (1/2) Page 322 PA-16LCBJ-A Figure 3-72 LT Connector Lead Accommodation (2/2) Page Page PA-16LCBJ-B Page The face layout of lamps and switches on this circuit card is shown in Figure 3-75. Switches on t he PA-16LC BJ-B card have the following meanings. Page 330 PA-16LCBJ-B Figure 3-76 L T Connector Leads Accommodation (1/2) Figure 3-76. Page 331 PA-16LCBJ-B Figure 3-76 LT Connector Leads Accommodation (2/2) Page Page Page 334 PA-16LCBW Figure 3-78 L ocation of PA-16LCBW (LC) within the System Page Page Switches on the PA-16LCBW card have the following meanings. (For North America, Other Country ( Law)) 350 1000 0.21 Compromise Impedance(EIA/TIA-464B) 600 Page Page Page 340 Accommodation of the LT connector leads for this circuit c a rd is shown in Figure 3-80. Figure 3-80 LT Connector Lead Accommodation (1/2) See also Connecting Route Diagram (Figure 3-81). Page 341 Figure 3-80 LT Connector Lead Accommodation (2/2) Connecting Route Diagram for the PA-16 LCBW (LC) is as follows. Page PA-16LCBY Page Switches on the PA-16LCBY (LC) card have the following meanings. Page Page Page Page 350 PA-16LCBY Figure 3-84 LT Connector Lead Accommodation (1/2) Accommodation of the LT connector leads for this circuit c a rd is shown in Figure 3-84. Page 351 PA-16LCBY Figure 3-84 LT Connector Lead Accommodation (2/2) Connecting Route Diagram for the PA-16 LCBY (LC) is a s follows. Page PA-16ELCJ Elect ric Lin e Cu rrent Page Page Swit ch es on the PA- 1 6EL CJ card have the f o llowi ng meanings. SW01-7 SW01-1 Page 358 PA-16ELCJ Electric Line Current Figure 3-88 LT Connector Lead Loc ation (16ELC Mode) (1/2) Page 359 PA-16ELCJ Electric Line Current 16ELC mode Page PA-16ELCJ-B Electro ni c Line Cir cui t Page Page Switches on t he PA-16ELCJ-B card have the fol lowing meanings. Page Page 366 Electronic Li ne Circuit Figure 3-91 LT Connector Lead Accommodation (16ELC Mode) (1/2) Page 367 Electronic Line Circuit Figure 3-91 LT Connector Lead Accommodation (16ELC Mode) (2/2) Page 368 Electronic Li ne Circuit 8DLC mode Page PA-FCHA Fusion Call Contro l Handler Page 371 PA-FCHA Fusion Call Con trol Handler Figure 3-94 Face La yout of PA- FCHA (FCH) Card 2. Mounting Location/ Condition The FCH can be mounted in a universal slot of the PIM. The face layout of lamps, switches, and connectors is shown in Figure 3-94. Page 5. Switch setting (1.) Turn on the MNT3 switch. (2. ) Flip the MB switch. shorter T203 timer value, t he earlier link failure detection will be obtained. When the D/I DTI (1.5M) is connected with the card front cable. Page Page Page Page The cable connections among the FCH, HUB, 24DTR are shown be low. Page Page PA-24LCBV Lamp indications for this card are shown below. Switches on the PA-24LCBV (LC) card have the following meanings. 350 1000 0.21 Compromise Impedance(EIA/TIA-464A) 600 Page Page 386 Figure 3-99 LT Connector Lead Location (PIM) (1/2) Page 387 Figure 3-99 LT Connector Lead Location (PIM) (2/2) Page 388 (b) LC Connector Leads Fi gure 3 -10 0 LC Connec tor Lead Loc a tion ( LC Cab le) LC Connector (1) CONN1 Champ Connector LT LC Connector (2) CONN2 LC Connector (3) CONN3 Page 389 Figure 3-101 Connecting Route Diagram Page Page PA-M69 Power Failur e Transf er Page Page Page Page 396 PA-M69 Power Failure Transfer Figure 3-106 LT Con nector Leads Acc ommoda tion Page 397 PA-M69 Pow er Failur e Tran sfer Figure 3-107 NCU Connector Accommodation Page PA-M96 HUB Page Page 5. Switch Setting Page Page Page 405 PA-M103 HUB Figure 3-112 L ocation o f PA-M103 (HUB) Card in the System PA-M103 HUB The PA-M103 (HUB) card can be mounted in any universal slot of PIM as shown below. within IMG0/4/8/12 (LPR accommodated IMGs). Page Page PA-8RSTK Page The face layout of lamps, switches, and connectors of this circuit card is shown in Figure 3-116. Page Page Page Page Page PA-8RSTM Page 418 PA-8RSTM Register Sender Trunk ~ Note: Indicates universal slots for line/trunk circuit cards. The mounting locations for this circuit card and the conditions related to mounting are shown below. The face layout of lamps, switches, a nd connector s for this cir cuit card is shown below. Page Page Page Page Page PA-8RSTY Page 425 PA-8RSTY Register Sender T runk Figure 3-120 Face Layout of PA-8RST Y (8RST) The PA-8RSTY (RST) card can be mounted any universal slots as shown below. Note: Indicates universal slots for line/trunk circuit cards. Note: Layout of L amps and switches differ from other RST cards. 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 -- Page Page 428 PA-8RSTY Register Sender Trunk SWITCH FUNCTION SWITCH SETTING MEANING SW10 DTMF Sign al R ecei v er Threshold Value [S tandard Setting] 4OFF Fixed to OFF SW11 MFR Signal Receiver Threshold Value [S tandard Setting] SWITCH FUNCTION SWITCH SETTING MEANING Page Page Page Page 433 SDH/SONET Digit al Trunk * Figure 3 -121 Lo cation of PA-SDTA (SDT) Ca r d in the System PA-SDTA SDH/SONET Digital Trunk Fusion Link with FCCH Page Page The face layout for lamps, switches, and connectors are shown in Figure 3-123. Page Switch settings on this circuit card are shown in the table below. . PA-SDTB PA-SDTA Page Page remaining time slots (for PIM3) cannot be used for other circuit cards. Page 443 SDH/SONET Digit al Trunk Figure 3-126 Example of Cab le Connection for 4-IMG System MUXxxx Connectors for SDT Receiver Sensitivity (dBm) Cable Length Level margin in the case of 15 k ilomete rs (9.3 miles) is as shown in the following table. Page 446 SDH/SONET Digital Trunk Note: The output of POUT A/B is 1,544 MHz. Figure 3-129 LT Connector Lead Accommodation Accommodation for the LT connector leads of this circuit card is shown in Figure 3-129. Page Page 448 PA-SDTB SDH/SONET Digital Trunk * Figure 3 -130 Lo cation of PA-SDTB (SDT) Ca rd in the System PA-SDTB SDH/SONET Digital Trunk Fusion Link with FCCH Page The face layout of lamps, switches, and connectors are shown in the figure in Figure 3-131. Page Page Page 453 PA-2CCHA Figure 3-132 Location of PA-2CCHA (CCH) within the System Common Channel Handler Page The face layout of lamps, switches, and connectors on this circuit card is shown in Figure 3-133. LAMP NAME COLOR STA T E Page When SW10-8 is set ON, SW10-5, 10-6 and 10-7 should be set ON. Page 458 SWITCH NAME SWITCH NO. SETTING STANDARD SETTING MEANING SW13 (for No. 0 Circuit) SW14 (for No. 1 Circuit) 2 Page 459 Figure 3-134 LT Conn ector Lead Acco mmodation (1/2) Page 460 Figure 3-1 34 LT Connec tor Lead Accommo dation (2/2) Page 461 Figure 3-135 Connecting Rout e Diagra m (Digi ta l CCIS) Page Page PA-24CCTA Co mmon C hanne l Trunk Page Page 466 PA-24CCTA Commo n Channel Trunk Figure 3-138 Face Layout of PA-24CCTA (24 CCT) The contents of lamp indications on this circuit card are shown in Table 3-9. As illustrated below, loopback testing can be performed at three locations on this card. Page Page Page Page Page Page Page 475 PA-24CCTA Comm on Channel Trunk See also Connecting R oute Diagram (Figure 3-141). Figure 3-140 LT Connector Lead Accommodation leads, see Chapter 2 in this manual. Connecting Route Diagram for the PA-24CCTA (24CCT) circuit card is as follows. Page Page PA-2DCHA D-Channel Handler Page Page Page When SW10-8 is set ON, SW10-5, 10-6 and 10-7 should be set ON. Page Page 485 PA-2DCHA D-Channel Handler Figure 3-144 LT Connector Leads Accommodation (1/2) Figure 3-144. Page 486 PA-2DCHA D-Channel Handler Figure 3-144 LT Connector Leads Accommodation (2/2) nations of 24DTI circuit card. Page Page PA-ILCG ISDN Terminal Line Circuit Page Page The contents of lamp indications on this circuit card are shown in the table below: Page Page Page 496 PA-ILCG Accommodation of the LT connector leads for this circuit card is shown in Figure 3-148. Figure 3-148 LT Connector Lead Accommodation See also Connecting Route Diagram (Figure 3-149). Page 497 PA-ILCG Figure 3-149 Connecting Route Diagram Page PA-4ILCH ISDN Line Circuit Page Page 501 PA-4ILCH ISDN Line Circ uit Figure 3-151 Face Layout of PA-4ILCH (4ILC) The contents of lamp indication on this circuit card are shown below. Page Page actual wiring configuration. Page 506 PA-4ILCH ISDN Line Circuit Figure 3-152 L T Connec tor Leads Accommo dation 6. External Interface Figure 3-152. Page Page PA-8ILCE-A ISDN Terminal Line Circuit Page Page 511 The face layout of lamps, switches, and connectors on the circuit card is shown in Figure 3-155. PKT MODE0 SW04 SW05 Figure 3-155 Face Layout of PA-8ILCE-A (ILC) The contents of lamp indications on the circuit card are shown in the table below. flas h wh e n t he termin al is idle and light s green at the time of call set-up. LAMP NAME COLOR DESCRIPTION Page Page 514 Note: Set the SW04 to determine the 4-wire bus mode referring to t he following. SWITCH SWIT CH NO. SETTING STAND AR D Page Page 517 Figure 3-1 56 LT Connector Lead Accommodatio n (1/2) See also Connecting Route Diagram. (Figur e 3-157) Page 518 Figure 3 -156 LT C onnector Le ad Accommodation (2/2) Page 519 Figure 3-157 Connecting Route Diagram Point-to-Point Point-to-Multipoint Page PA-4DATA Dig ital Anno un cem en t Tru nk Page The face layout of lamps, switches, and connectors on this circuit card is shown in Figure 3-159. Standard settings of various switches on this circuit card are shown in the table below. 32-sec . mod e = 2 recording circ uits 60-sec. mode = 1 recording circuit by SW1-SW4. the same way (Two different modes cannot be mixed assigned.). Page SWITCH SWITCH Page 527 PA-4DATA Digital A nnouncement Trunk Figure 3-160 LT Connector Lead Accommodation Connect a tape recorder to the DAT card with a cable. Page Page PA-4DATB Dig ital Anno un cem en t Tru nk Page The face layout of lamps, switches, and connectors on this circuit card is shown in Figure 3-162. Page Page Page Page 537 PA-4DATB Digital A nnouncement Trunk Figure 3-163 LT Connector Lead Accommodation Connect a tape recorder to the DAT card with a cable. HOW TO RECORD A MESSAGE MBRQ WR START Page Page PH-M16 Line Test LPM Page Page Page 545 PH-M16 Line Test 00 01 02 03 04 MISC CONNECTOR MISC Connector Accommodation PH-M16 MISC MISC CONNECTOR (PH-M16) PH-M16 Page Page Page 548 PA-4AMPC AMP Pool Trunk Figure 3-168 Location of PA-4AMPC (4AMP) w ithin the System PA-4AMPC AMP Pool Tr un k Page The face layout of lamps, switches, and connectors of this circuit card is shown in Figure 3-169. Page Page 552 PA-4AMPC AMP Pool Trunk When this card works as AGC: SW03 SW04 is set to all ON. Page PA-8TLTR Tie Line Trun k Page Page Page Page Page Values shown for S W1. Page Page Reference : Table of Fixed PADs Page 564 Figure 3-172 LT Connector Lead Accommodation (1/2) Page 565 Figure 3 -172 LT C onnector Lead Accommodation (2/2) Page 566 Fig ure 3-173 Connecting Route Diagram (LD/DID 2W E&M) LD/DID 2W E&M This diagram shows connecting route diagram when the PA-8TLTR is used as a LD or DID trunk. Page 567 Figure 3-174 Connecting Route Diagram (4W E&M) 4W E&M Page 568 Figure 3-175 2400 O DT CABLE Lead A ccommodation 2400 ODT CABLE Note: Leads in round brackets are not used for the time being. The "2400 ODT CABLE" has one ODT connector whose lead accommodation is shown below. Page 569 Figure 3-176 2400 O D T CABLE-A Lead A ccommodation 2400 ODT CABLE-A Note: Leads in round brackets are not used for the time being. The "2400 ODT CABLE-A" has three ODT connectors whose lead accommodation is shown below. Page PA-M87 Recording / Pagin g Device Adapter Page Face layout of each lamp, switch and connector on this circuit card is shown in Figure 3-178. The table below shows the meaning of lamp indications. Switch settings on the card and their detailed meanings are as follows: Left Ri g ht Page 576 PA-M87 Recording / Paging Device Adapter The location of REC/PGA connector leads and their connection diagram are shown in Figure 3-179. Figure 3-179 R EC/PGA Co nn ector Lea ds See also Connecting Route Diagram. (Figur e 3-180) Location of REC/PGA Connector Leads CHAMP Connector (J) REC/PGA Page Page Page Page Left Ri g ht PA-24PRTB-A Primary Rate Interface Trunk Page - Page Page Page Page Page 589 PA-24PRTB-A Primary Rate Interface T r unk See also Connecting Route Diagram (Figure 3-184). Figure 3-183 LT Connector Lead Accommodation Connecting Route Di agram for the PA-24PRTB-A circuit card is as follows. the PLO card, see Chapter 2 in this manual. Page PA-24DTR (DTI) Dig ital Trun k Inter face Page Page 594 PA -2 4 D TR ( D TI) Digital T runk Interface Figure 3-186 Face Layout of P A-24D TR (DTI) Page Page Page Page Page Page Page Page 602 PA -2 4 D TR ( D TI) Digital T runk Interface The leads appear as follows on the LT connectors. Figure 3-188 LT Connector Lead Accommodation See also Connecting Route Diagram (Figure 3-189). leads, see Chapter 2 in this manual. Connecting Route Diagram for the PA-24DTR (DTI) circuit card is as follo ws. Page PA-24DTR (DLI) Digital Line Interface Page Page 607 PA - 24 D TR ( D LI) Digital Line Interface Figure 3-191 Face Layout of P A-24D TR (DLI) Page Page Page Page Page Page Page Page 615 PA - 24 D TR ( D LI) Digital Line Interface The leads appear as follows on the LT connectors. Figure 3-193 LT Connector Lead Accommodation See also Connecting Route Diagram (Figure 3-194). Connecting Route Diagram for the PA-24DTR (DLI) cir cuit card is as follows.