NEC MA4000 manual User ID and Password fields optional, Setup IP... button

Hardware Information 5-5

User ID and Password fields (optional)

The User ID and Password fields can be used if authentication is required.

The following options can only be used after the software has been successfully installed and the system is online.

NOTE

Test button

Clicking the Test button performs a verification of the system connection selected. If the test connection fails, Figure 5-3displays.

Figure 5-3Test Connection - Login Failed

Setup IP... button

Clicking the Setup IP ... button allows the user to configure the active and standby IP addresses, subnet mask, default gateway, speed, duplex mode, and the ARP broadcasting period (no send, 30 sec., 60 sec., or 120 sec.), if applicable. The user identification and backup IP passwords can also be activated. See Figure 5-4(UNIVERGE SV8500 example), Figure 5-5(UNIVERGE SV7000, UNIVERGE IPX, NEAX IPX, and NEAX IPX DM example), and Figure 5-5(NEAX IPX UMG example).

	If the Backup IP/Password Settings option is selected, Installation Manager will
NOTE	back up the SV7000 after configuring the IP address and password.
	For the IPX, the Backup IP/Password Setting is not available. Instead, there is a
	Total PIMs (Physical +Virtual) field.
	The IPX Installation Manager will automatically perform a System Backup and then
	reset the Voice Server, after the IP address and password are configured.

MA4000 Installation Manager User Guide - Revision 7