Nortel Networks M3903, M3902, M3904, M3901 manual Set-to-Set Messaging, Edit

Set-to-Set Messaging

Set-to-Set Messaging

With the Set-to-Set Messaging application activated (available on the M3903 and M3904), an internal caller using an M3903 or an M3904 receives a quick visual message, which you have selected, whenever they dial your telephone number. The length of your message is limited to 24 characters. The message is entered through the dial pad keys using a process similar to the one used for entering names in the M3904’s Personal Directory. Your network administrator may provide access to a list of up to ten messages which you may customize and select as your current set-to-set message. Only one message at a time may be customized and only one message can be stored.

You can check your Call Log to determine whether or not a caller was sent the

set-to-set message. A * (M3903) or (M3904) will appear beside the call log entry of the callers who saw your message. Note: This feature is not available on the Meridian SL-100.

To access Set-to-Set Messaging:

Applications /

Set to Set Messaging

Select

1.Press the Applications Key.

2.From the Applications menu, use the Navigation Keys to highlight Set to Set Messaging.

3.Press the Select Key.

	The Set-Set Msg screen appears
	indicating the status of the feature (on
	or off) and whether or not a message
	is stored (defined) in memory.
	Note: On the M3904, if you have
	activated password protection on your
	Directory/Log, you will need to enter your
	password to continue.
To edit the currently stored message,
or to create a new message:
Edit	1. Press the Edit Key.

111