Nortel Networks M3904, M3901, M3903 manual Use Attendant Recall, Use Call Park M3902, AttRecall

While on an active call

If the transferred call is not answered, your telephone rings:

Trans

Use Attendant Recall

1.Lift the handset.

2.Press the Transfer Key and repeat the transfer (to a different DN).

Note: If you transfer a call to a person and they pick up the line while you are still on the line, press the Goodbye Key to complete the transfer. Check with your network administrator to determine the time interval of your recall timer.

The Attendant Recall feature allows you to contact an attendant while on a call and connect the call to the attendant.

To contact the attendant while on a call:

AttRecall

Goodbye /

Use Call Park (M3902)

1.Press the Attendant Recall Key while on a call.

Stay on the line until the attendant answers.

2.Press the Goodbye Key.

The caller remains connected to the attendant.

Note: On the Meridian SL-100, the Attendant Recall Key is not available; use the Transfer Key to connect a call to the attendant.

The Call Park feature allows a call to be held temporarily and to be retrieved from any telephone. You can park an incoming call and page the called party. Call Park can also be used on outgoing calls. When you use Call Park, you do not tie up a line. Your network administrator can set up a System Park Extension where most calls are automatically parked.

If configured network-wide, Call Park can be used across networks.

28