Nortel Networks M3904, M3901, M3903 manual Use Speed Call M3902, SpcCtlr SpcUser

Make a call

Use Speed Call (M3902)

The Speed Call feature allows you to automatically dial frequently called numbers by entering a one, two, or three digit access code. Contact your network administrator to determine the capacity of your Speed Call list. This will establish the number of digits you will enter for each access code.

A telephone designated as a Speed Call Controller can program or edit the Speed Call list. This feature must be enabled by your network administrator.

To store or change a Speed Call number:

SpcCtlr

SpcCtlr

To make a Speed Call:

SpcCtlr SpcUser

or

1.Press the Speed Call Controller Key.

The triangular icon flashes, indicating programming mode.

2.The phone prompts you to dial a one, two, or three digit code and the telephone number.

Note: Dial the access code (if required) followed by the internal, external, or long-distance telephone number.

3.Press the Speed Call Controller Key again.

The code and number are saved. The flashing icon turns off.

1.Lift the handset.

2.Press the Speed Call Controller key or the Speed Call User Key.

3.Dial the Speed Call code assigned to the telephone number.

The number is automatically dialed.

20