Nortel Networks M3901 Your telephone call features, Use handsfree calling M3902, M3903, and M3904

Your telephone call features

Your telephone call features

Your network administrator assigns features to your programmable feature keys. Whenever this guide describes a procedure that requires special codes ask your network administrator to provide these to you.

To access a feature, you press a Feature Key, or enter a Flexible Feature Code (FFC) for the Meridian 1 or a Feature Access Code (FAC) for the Meridian SL-100. Your network administrator supplies you with the Flexible Feature Codes or Feature Access Codes for your system.

Note: In order to use a feature described in this section, your system software must support the feature and the feature must be assigned to your telephone. Check with your network administrator for more details.

Use handsfree calling (M3902, M3903, and M3904)

If your telephone is an M3902, M3903, or M3904 you can use the built-in microphone and speaker instead of the handset to make or receive a handsfree call. While on an active call, you can switch between Handset and Handsfree mode.

To answer a call with handsfree:

Press the Handsfree Key. You are now on a handsfree call.

To discontinue a handsfree call:

Goodbye / Press the Goodbye Key to end the call.

To mute a handsfree call:

Mute /

Mute /

To switch from handsfree to handset:

1.Press the Mute Key. The LED indicator flashes.

2.Press the Mute Key again to return to a two way handsfree conversation.

1.Lift the handset to switch from handsfree to handset.

10