Nortel Networks M3902, M3901 manual Use Speed Call M3903 and M3904, SpcCtrl SpcUsr

Make a call

Use Speed Call (M3903 and M3904)

The Speed Call feature allows you to automatically dial frequently called numbers by entering a one, two, or three digit access code. Contact your network administrator to determine the capacity of your Speed Call list. This will establish the number of digits you will enter for each access code.

A telephone designated as a Speed Call Controller can program or edit the Speed Call list. This feature must be enabled by your network administrator.

To store or change a Speed Call number:

SpcCtrl	1. Press the Speed Call Controller Key.
	The screen displays Enter Code, then
	number.

Done

To make a Speed Call:

SpcCtrl SpcUsr

or

2.Dial a one, two, or three digit code. Use the Delete Key if you make a mistake. Use the Cancel Key to leave the screen without storing a speed call number.

Note: A dash is automatically inserted after the required number of digits have been entered.

3.Dial the associated telephone number. Use the Delete Key if you make a mistake. Use the Cancel Key to leave the screen without storing a speed call number.

Note 1: Dial the access code (if required) followed by the internal, external, or long-distance telephone number.

4.Press the Done Key to save the code and number.

1.Lift the handset.

2.Press the Speed Call Controller Key or the Speed Call User Key.

The screen displays Enter code.

21