Nortel Networks M3903, M3902, M3904, M3901 manual Radio Paging, RadioPage

Additional Call Features

Radio Paging

Some telephone systems can have an on-site Radio Paging system. This system feature allows you to page a person and stay on the line until they answer. The paged person answers the call when they enter a special Paging “Meet - me” code from any telephone. This connects the person paged to the party who paged them.

Note: On the Meridian SL-100, dial the Paging Feature Access Code (FAC). A network connection is established with the paging access trunk. This provides access to loudspeaker paging equipment. Automatic Pre-selection, Automatic Post-selection, and Special Radio Paging features do not apply to

Meridian SL-100.

To use Automatic Pre-selection (“Meet - me” page):

1. Lift the handset.

2. Dial the Radio Paging Access FFC.

You receive paging dial tone.

3. Dial the number of the party you want to page.

You receive ringback/ring tone.

To use Automatic Post selection:

RadioPage

Note 1: The person you paged uses any telephone to enter the Radio Paging Answer FFC, plus their own DN. This action connects you and the person paged.

Note 2: If your call goes unanswered for a preset time period, you receive a continuous high pitched tone then silence. Press the Goodbye Key.

The called party is either busy on the telephone or away from the desk.

To page the called party there is no need to redial the number of the called party.

1.Press the Radio Page Key. You receive special dial tone.

63