17
CallPilot Reference Guide
Chapter 3Setting up your mailboxThis chapter describes how to set up your mailbox and explains:
•Initializing your mailbox
•Checking which mailbox interface you use
•Opening your mailbox
•Changing your mailbox password
•Recording your name in the Company Directory
•Assigning a Target Attendant
Initializing your mailbox
Initializing your mailbox prepares your mailbox to receive mes sages. Your mailbox cannot receive
and store messages until it is initialized.
Initializing your mailbox involves:
• choosing a password from four to eight digits long that does not start with zero
• changing the CallPilot default password to your password
• recording your name in the Company Directory
To initialize your mailbox
1Press ≤·°⁄.
2Log on by following the voice prompts.
3This display appears briefly to indicate that you must change your
password.
4Enter a new password from four to eight digits long that does not
start with zero.
Press OK or £.
5Reenter your new mailbox password and press OK or £.
6At the tone, record your name in the Company Directory.
Include your mailbox number in the recording, For example, “Pat
Smith, mailbox 5813.”
Press OK or £ to end the recording.
Must change pswd
Pswd:
RETRY OK
Again:
RETRY OK
Record name:
RETRY OK