Nuance comm D60709-22 manual Register card with PUK code, Logout, Enter PUK code Tap PUK code

4 Using SafeCom Go Sharp

4.1.6Register card with PUK code

The user logs in by entering an ID code or using a card. If the ID code or card is unknown and there is an available PUK code in the SafeCom system the user is asked to enter his PUK code.

Enter PUK code:

1.Tap PUK code.

2.Enter PUK code on the touch-screen. Tap OK.

3.Tap OK.

Enter PUK code and PIN code:

1.Tap PUK code.

2.Enter PUK code on the touch-screen. Tap OK.

3.Tap PIN code.

4.Enter PIN code on the touch-screen. Tap OK.

5.Tap OK.

4.1.7Logout

There is a configurable Timeout that defaults to 60 seconds. The logout process is initiated if no buttons are tapped for this period.

To logout actively:

∙Tap Log out on the main screen.

∙Log out using the card (only if user logged in with card).

D60709-22 53