3 SafeCom Controller
3.2Configure the Sharp device web interface
3.2.1New Sharp devices
Follow the steps below to configure the web interface on new Sharp devices. If you have an old Sharp device, refer to section (3.2.2).
The web interface MUST be configured to allow communication with the SafeCom Go Sharp solution.
1.Open the Sharp device’s web interface and login.
2.For the device enter the User name (default is admin) and Password (default is admin). On older devices the default password is Sharp (1.4).
3.Click Login.
4.Click Application Settings, and then External Applications Settings.
33 |
