Restore factory default | Nuance comm D60709-22 specification

2 SafeCom Go Sharp - Device server

2.6.8Restore factory default

1.Open a web browser and login to the SafeCom Device Server (2.3.1).

2.Click Restore factory default at the bottom of the web page.

The factory default values are:

Configuration	Field	Default value
settings
Device settings	Model
	MAC Address
	Device Message
User settings	Login Method	Auto-sense
	Idle timeout	60 seconds
	Post tracking	Cleared (No)
Network settings	Address	Device IP address
	SNMP Get Community	Public
	SNMP Put Community	Private
	RAW print port	9100
Device information	Contact
	Location
	Description
	Manufacturer
Drivers
Device properties	welcomeScreen
	welcomeScreenTimeOut	120
	adminLogin	admin
	adminUserName	admin
	serviceLogin	service
	NewModel	false
		Date and time of
		configuration
Device applications	E-mail	Checked (Yes)
	Pull Print	Checked (Yes)
	Copy	Checked (Yes)
	Scan to USB	Checked (Yes)
Logging	Enable logging	Checked (Yes)

D60709-22

27

Image 27

Nuance comm D60709-22 manual Restore factory default, Configuration Field Default value Settings

Contents

Nuance SafeCom Go Sharp Nuance Communications, Inc Table of Contents Regulatory information Index ∙ SafeCom Device Server IntroductionSafeCom Go Sharp Requirements SafeCom Go Sharp supported Sharp OSA-enabled MFPs Identification Method SafeCom ID DevicesSafeCom Go Sharp supported SafeCom ID Devices Serial Available documentation Sharp device passwords About this manual Document history Introduction Overview SafeCom Go Sharp Device server installationInstallation SafeCom Go Sharp Device server Outbound on SafeCom Device Server Protocol Inbound on SafeCom Device Server Protocol Add SafeCom Server Configure SafeCom Device ServerLogin to SafeCom Device Server Login to SafeCom Device Server Description Default Device Server config.ini Device icons Add device to a SafeCom Device Server Click the Add device tool button Add device via SafeCom Device Server Add device server Start SafeCom Administrator Add device via SafeCom Administrator Add device server device SafeCom Go Sharp Device server Now Remote Operating. Please do not turn off the Power Configure device in SafeCom Device Server ∙ Device information ∙ Network settings Card ID code Card or ID code ∙ Device settings ∙ Device Properties External Accounting Application Settings Get the SafeCom Go Sharp software Select login methodEnable Copy SafeCom Go Sharp How to Register device Enable E-mailControl user access rights Enable SafeCom Mobile Pull Print Configuration Field Default value Settings Restore factory default Uninstall SafeCom Go Sharp IP address / hostname Installation with SafeCom ControllerSafeCom Controller Write down the IP address of the device Connect hardware Switch off the power to the device Click Broadcast… Add device in SafeCom AdministratorIP address known from Dhcp server Find it via Broadcasting Example mysharp.safecom.eu New Sharp devices Configure the Sharp device web interface Http//ip address/soapsharp/safecom.scx Click Standard Application Settings SafeCom Controller Application Name enter Pull Print Click External Accounting3 Sharp Web Interface old models Click Standard Applications Application Name enter Pull Print Configure the SafeCom Controller Web Interface Login to the SafeCom Controller Web InterfaceAdvanced Configuration web SafeCom web Copy Idle Timeout is ignored Printer webPrinter Manufacturer should be Sharp SafeCom Go must be YES Specify SafeCom Server and device connection Enable copy tracking for ControllerChange Copy Enabled to YES Click Save and Continue SafeCom Go for Controller How to Set password to prevent unauthorized access Select user identification Disable the Test buttonEnable Copy Control Assign a fixed IP address to the SafeCom Controller Click Restore Factory Default Enable High Speed PrintAccess Sharp MFP’s System Settings Resend configuration Open the Sharp MFP’s web page and login Using SafeCom Go Sharp LoginSharp device with SafeCom Device Server Main menu Tap Pull Print Pull Print Document list Account Select billing code Copy Enter PUK code and PIN code Tap PUK code Register card with PUK codeLogout Enter PUK code Tap PUK code Sharp device with SafeCom Controller Control panel LoginLogin with ID code Tap ID code Login with ID code and PIN code Tap ID code Login with Windows Tap Documents Copy Servlets TroubleshootingSafeCom Administrator Unable to locate all SafeCom devices SafeCom Help Desk Assistant At the printer No billing codes available MFP reports Could not access the accounting server…ERROR5000 Processing is in motion Print performance is slow SafeCom reader does not work Device Server Configuration of devices failed Regulatory information Index Page Index D60709-22