Nuance comm D60709-22 manual Register device, Set password to prevent unauthorized access

3 SafeCom Controller

3.4.3Register device

The device is registered when a user with Technician or Administrator rights has logged in at the device. Once the device is registered it will appear in the SafeCom Administrator. The device is also registered when you add it in SafeCom Administrator.

Note: You can use the built-in Technician account TECH with the default PUK code 12345678 and default PIN code 1234.

3.4.4Set password to prevent unauthorized access

To prevent unauthorized access to the SafeCom Controller’s configuration we recommend that you change the password from the default: adm. To disable security, change the password back to adm.

1.Open the Advanced Configuration web page (3.3.2).

2.Click Password.

3.Enter the Old Password, New Password and Verify Password. The password is maximum 8 characters.

4.Click Save and Continue.

5.Click Restart.

Warning: Make sure to store the password in a secure place. If you forget the password you need to return the SafeCom Controller to SafeCom a/s for unlocking.

D60709-22 45