2 SafeCom Go Sharp - Device server

Device settings

o Administrator name: The user name with which the administrator can log in to device.

o Administrator password (mandatory): The device password with which the administrator can log in to device.

o Login method: This determines how users log in. Choose between:

-Auto-sense. Auto-sense maps to Card or Windows if an ID device is connected to the MFP and on devices it maps to Card. Otherwise it maps to ID code. Mapping changes within 10 seconds after the ID device is either connected or disconnection. If it does not change a restart of the device may be required.

-Card

-ID code

-Card or ID code

-Card or Windows: Allows the user to log in by either card or by typing in their Windows credentials and selecting domain from drop-down list.

Note: Identification by card requires connecting a USB ID Device (card reader). The option Card or Windows allows the user to log in by either card or by entering their Windows username, password, and domain. The SafeCom G4 server must be a member of the domain or trusted by the domain.

oDefault domain: Specify the domain to pre-fill the domain for users when logging into a device. If using SafeCom Mobile Pull Print the domain must be specified, as the users are not prompted for domain when logging into a device using a smart phone. If the default

domain is not specified, but the users are required to use domains, they can enter the domain with their username (domain\username).

oIdle timeout: Specifies in seconds when a logged in user is automatically logged out if there's no activity.

oHide domain: Check to allow the users to log in without specifying

the domain.

oEnable post tracking: This is relevant only with SafeCom Tracking.

Refer to SafeCom G4 Administrator’s ManualD60650

oReverse document list: Check to show the latest printed

documents at the top of the document list.

oMask ID code: Check to mask the ID code with asterisk (*) when entered at the device.

Drivers: When Pull Printing, SafeCom compares the driver name embedded in the print job with its list of driver names. If no match is found and if Show fidelity warning is checked in the Server properties in the SafeCom Administrator, the document appears with a question mark [?] in the document list. This way the user is warned that fidelity is low and the document may print incorrectly.

oClick Get All to obtain the list of drivers from the SafeCom Server, or add and delete drivers manually.

D60709-22

23

Page 23
Image 23
Nuance comm D60709-22 manual ∙ Device settings, Card ID code Card or ID code