Oki 5300n manual Color Menu

COLOR MENU

The printer automatically adjusts colour balance and density at appropriate intervals, optimising the printed output for bright white paper viewed in natural daylight conditions. The items on this menu provide a means of changing the default settings for special or particularly difficult print jobs. Settings revert to their default values when the next print job is complete.

COLOR MENU

ItemSettings

DENSITY CONTROL AUTO MANUAL

AUTO DENSITY	EXECUTE
COLOR TUNING	PRINT PATTERN
C HIGHLIGHT	-3~0~+3
C MID-TONE	-3~0~+3
C DARK	-3~0~+3
M HIGHLIGHT	-3~0~+3
M MID-TONE	-3~0~+3
M DARK	-3~0~+3
Y HIGHLIGHT	-3~0~+3
Y MID-TONE	-3~0~+3
Y DARK	-3~0~+3
K HIGHLIGHT	-3~0~+3
K MID-TONE	-3~0~+3
K DARK	-3~0~+3
C DARKNESS	-3~0~+3
M DARKNESS	-3~0~+3
Y DARKNESS	-3~0~+3
K DARKNESS	-3~0~+3

Explanation

If set to AUTO, image density will be automatically adjusted at power on, when a new image drum or toner cartridge is installed, and at intervals of 100, 300 and 500 drum counts. If a 500 drum count interval occurs during a print job it will occur at the end of that job, and will take up to 55 seconds. If set to manual, this adjustment will only be performed when initiated by the next menu item.

Selecting this will perform the auto density set up immediately.

Selecting this item prints the colour tuning pattern to help you adjust the colour balance.

Adjusts image density for each colour component (cyan, magenta, yellow and black. Normal setting is 0.

Adjusts darkness of each colour component (cyan, magenta, yellow and black. Normal setting is 0.

MENU FUNCTIONS > 145