9.Choose ProjectsSave Project and enter a meaningful name (e.g. “Letter Stationery”) so that you can recognise it later if you want to modify it.

10.Choose ProjectsSend Project Files to Printer to download the project to the printer.

If you have a hard disk in the printer, SDM will automatically download files to it. If not, SDM will download files to flash memory. If you have a hard disk but still prefer to download to flash memory, double-click the file name in the Project window and under Volume, type in %Flash0% and then click OK.

11.When the message “Command Issued” appears confirming that the download is complete, click OK to clear the message.

TEST PRINTING THE OVERLAY

1.Click on the printer icon for the relevant printer and choose PrintersTest Form.

2.In the Test PostScript Form window, to test each overlay select it and click OK. There will be a short pause while the printer processes the form, and then it will print.

3.When each overlay has been tested, click Exit.

4.Click the standard Windows Close (X) button, or choose ProjectsExit to close Storage Device Manager.

DEFINING OVERLAYS

This is the final step before the new overlays are ready for use.

1.Open the Printers (called “Printers and Faxes” in Windows XP) window via the Start menu or the Windows Control Panel.

2.Right-click on the Relevant PostScript printer icon and choose Printing Preferences from the pop-up menu.

3.On the Overlay tab, click the New button.

OVERLAYS AND MACROS > 159

Page 159
Image 159
Oki 5300n manual Test Printing the Overlay, Defining Overlays