2.Press ENTER.
ENTER PASSWORD ****
....will appear on the display.
3.Use + / – to set the number for the first digit of the password, then press ENTER to enter the number and move to the next digit:
ENTER PASSWORD 5***
....will be displayed (showing first digit selection).
4.Repeat step 3 for each of the remaining digits in the password.
SELECT JOB ALL JOBS
....will be displayed when all digits have been selected.
5.Press CANCEL.
DELETE THE JOB
Y = ENTER/N = CANCEL
...will be displayed.
6.Press ENTER to delete the job, then press ON LINE
Run Maintenance Cycle Before Printing
This option allows you to improve your print quality if you suspect there is a problem with printing, such as too much graininess in the print.
1.Select Run Maintenance Cycle Before Printing to force the printer to automatically clean itself before printing.
