CONFIGURING INSTALLED HARDWARE OPTIONS
NOTE
This information is for Mac OS X 10.2 or higher only. This feature is not available on Mac OS X 10.0 - 10.1.5.
When you set up a printer using AppleTalk or USB, the printer’s installed hardware options are normally detected and automatically configured. However, if you are setting up a printer using TCP/IP, or have added any additional hardware options since setting up the printer, you need to manually configure installed hardware options.
TO MANUALLY CONFIGURE INSTALLED HARDWARE OPTIONS:
1.Launch the Print Center utility. This is located in the Applications/Utilities folder.
2.Select the printer model in Print Center.
3.From the Printers menu, select Show Info.
MAC OS X > 106
