Proof and print feature

This feature allows you to send multiple copies of a document to print but only print the first copy so that you can check the output quality before printing the rest.

NOTE

With both PS and PCL drivers, this feature requires the optional internal hard disk to be fitted and enabled in the Start/Settings/Printers/ Properties/Device options dialogue.

SENDING THE DOCUMENT TO PRINT

From your application’s Print dialogue, select the number of copies you need, and then click the Properties button.

1.In the driver window, on

the Job Options tab, select

 

Proof and Print (1).

1

 

2.In the small pop-up window which appears, enter a name for this print job (16 characters maximum) and a 4-digit PIN using any combination of digits from 0 to 9, and click OK.

3.Click OK again to close the

driver window, and again to close your application’s Print dialogue.

The document will be sent to the printer’s hard disk but only the first copy will print.

See Chapter “Printer Settings in Windows” for information on printing the remaining copies.

WINDOWS 9X DIFFERENCES > 37

Page 37
Image 37
Oki 5300n manual Proof and Print