This option simulates how the output will look on a printing press using the ink types SWOP, Euroscale or Japan. If using CMYK Ink Simulation, it is recommended that you switch off all other Printer Colour Matching by selecting the No Colour Matching option under the “Colour Match Using” option in the printer driver.
Select the option desired.
YOUR PRINTER
3
2
5
4
2.Separations
This option affects output only, allowing you to print all colours or separate plates.
Select the option desired.
3.Media Check
Sets whether the printer checks the matching of paper size to that of the tray. Only standard sizes are checked.
4.Toner Saving
Checking this will enable toner saving, but reduce print quality and provide a much lighter print.
5.Page Rotate
Checking this will rotate the printed material on the page 180 degrees.
