13)Scanning method

2592 bits contact image sensor.

14)Printing method

211.3 mm (2496 bits) and/or 216.7 mm (2560 bits)

15)Minimum scanning time

NSS= 0, 5, 10 ms DCS= 0, 5, 10 ms

16)Minimum print time

NSF= 0 ms

DIS=10 milliseconds for 3.85 lines/mm.

5 milliseconds for 7.7 lines/mm.

17)Print speed

Max. 8 sheets per minute (at NA Letter size)

Note : Under following conditions, the printing speed will be at 6 PPM.

-In PC print mode

-When the paper width is smaller than JISB5(128mm).

18)Power save

The FX-051 realizes low power consumption by new power supply unit.

This function is feeding power to the necessary minimum circuit at standby state by adoption of New power supply. When the machine becomes the operation state, power supply is feeding to the all circuits.

By adoption of this system, power consumption at standby state becomes below 0.5W. Pre-heating time (Standby to Print):

Approx.30 sec

Note 1: When the “MCF automatic printing” is set to ON, the MCF printout time is as follows. (Communication end to Print)

Approx. 20 sec

Note 2: This feature is not available FX-051 (ODA)

19)Coding scheme

Modified Modified READ (MMR), Modified READ (MR), and Modified Huffman (MH).

40672201TX Rev.4

2 - 4