Manual Dialing (External Telephone)

It is assumed that the operator dials the telephone number by using the dialing facility provided on the telephone unit. This operation is indicated by the rightmost in Fig. 4-1-1.

Since the machine is not involved in this dialing operation, the message on the LCD will remain unchanged, that is Time.

When the operator completes dialing, the exchange will establish connection with the called station through PSTN (Public Switched Telephone Network). Assuming the call is answered, the operator will hear CED tone from the distant station and taps START key in a similar fashion as mentioned for Local Keypad Dialing.

Pressing START causes the machine to switch the line connection to the facsimile facility, and proceeds to transmit message. The message on LCD is now changed to:

MANUAL TX START

The machine proceeds to send massage which corresponds to the "MANUAL SEND MODE" block, also shown the rightmost in Fig. 4-1-1.

One-Touch Auto Dialing

It is assumed that the telephone number "00116097784184" had been assigned to One-Touch No. 1 in advance. The handset is assumed to be on hook.

The operator taps One-Touch No. 1 on the Operation Panel. This operation is indicated by the leftmost in Fig. 4-1-1.

The machine immediately responds to the operator's action and the LCD will display the entire preprogramed telephone number corresponding to One-Touch No. 1 with a guidance message:

OKI TAKASAKI

YES(START) NO(LOC.)

The message corresponds to " " shown in Fig. 4-4-6, because "AUTO START" is disabled and the call is originated on hook.

40672201TX Rev.4

4 - 16